Spring Steel Wire Reinforced Silicone Hoses (Shore 300 and 310 series)

Type 1 (Shore 300) : Silicone hose with 2-3 plies of Polyester reinforcement and an inner ply of Spring Steel. The outer and inner surfaces are smooth.

Applications : Heating and cooling systems in buses, coaches and industrial vehicles.
Fluid Transmission in applications where high flexibility is required.

Type 2 (Shore 310) : Silicone hose with 2 plies of Polyester reinforcement and an inner ply of Spring Steel Wire. The inner surface is smooth while the outer surface is convoluted / corrugated.

Applications : Fluid Transmission in applications where high flexibility is required.

Dimensions available
Wire reinforced hoses (Shore 300 series) are available in a range of dimensions as follows:

Diameters (in mm.): 6 8 10 11 12 12.5 13 15 16 18 19 20 22 25 28 30 32 35 38 40 42 44 45 48 50 51 53 55 57 60 63 65 70 75 76 79 80 82 83 85 86 89 90 92 95 98 100 115 127 140
We can also make sizes other than the above if required. We manufacture these steel wire reinforced hoses and silicone reinforced hoses in 4 meter length, but they can be cut and supplied in smaller lengths, as per the customer's requirement.

Steel Wire Reinforced Hoses (Shore 310 series) are usually supplied in 1 meter lengths. However, we can also supply in different lengths as required. Also, the length of the cuffs (plain section) at the 2 ends, can be specified by the customer.

Diameters (in mm.): 6 8 10 11 12 12.5 13 15 16 18 19 20 22 25 28 30 32 35 38 40 42 44 45 48 50 51 53 55 57 60 63 65 70 75 76 79 80 82 83 85 86 89 90 92 95 98 100 115 127 140